Introducing the case of live streaming the Goyang Senda Stove League futsal match.
You can easily record or stream a game with just a smartphone, but this time we went all out. Four cameras connected, futsal scoreboard display, and even a live caster commentary!
We connected external cameras to CameraFi Live to stream live on YouTube and used the futsal scoreboard overlay feature in CameraFi Studio. By using a cooler, we were able to improve the broadcast quality.
First Match (iOS)
✔️Broadcast Settings: YouTube Live 1080p 60fps
✔️Equipment Used:
1) iPhone 15 Pro X CameraFi Live
2) 4Cameras (FX3, A7M4, A7S, GoPro 12 Pro)
3) Accsoon SeeMo
4) Switcher (Roland V1-HD)
5) iPad 11 Pro X CameraFi Studio
6) Smartphone Cooler
7) Microphone
Second Match (Android)
✔️Broadcast Settings: YouTube Live 1080p 30fps
*Since the external camera did not support 60fps, the broadcast on Android was streamed at 30fps. An app update is coming soon that will allow external cameras supporting less than 60fps to stream at 60fps, so please stay tuned!
You can check out the Android 1080p 60fps broadcast below.
🔗Watch the Android 1080p 60fps broadcast (from 36:00)
✔️Equipment Used:
1) Galaxy S23 Ultra X CameraFi Live
2) 4Cameras (FX3, A7M4, A7S, GoPro 12 Pro)
3) BU113
4) Switcher (Roland V1-HD)
5) iPad 11 Pro X CameraFi Studio
6) Smartphone Cooler
7) Microphone
Equipment Setup Overview
1. Wired Setup: [CameraFi Live] – [Capture Card] – [Switcher] – [Multiple External Cameras]
2. Wireless Remote Scoreboard: [CameraFi Studio]
1) CameraFi Live App
- We used the CameraFi Live app for live streaming.
- The first match used an iPhone 15 Pro, while the second match used a Galaxy S23 Ultra.
2) CameraFi Studio App
- The futsal scoreboard was controlled remotely using CameraFi Studio on an iPad 11 Pro.
3) Capture Cards (BU113, Accsoon SeeMo)
- For the first match, we used the MFi-certified Accsoon SeeMo capture device to connect the iPhone to the switcher.
- For the second match, BU113 was used to connect the Android device to the switcher.
4) Roland V1HD Switcher
- The switcher was used to switch between multiple camera angles during the broadcast.
5) Four Cameras
- We used FX3, A7M4, A7S3, and GoPro 12 Pro cameras.
6) Smartphone Cooler
- We were able to resolve the issue of broadcast interruptions caused by overheating by using a cooler. For a high-quality broadcast, we recommend using a cooler!
7) Microphone
- Caster used a microphone for live commentary during the match.
Try broadcasting futsal games with CameraFi Live and CameraFi Studio! If live broadcasting is challenging, you can also record the game with the scoreboard overlay.
